Install Instructions

Z207935-0C Page 3 of 9 ©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [e-mail] 0920
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
HW2 Series Installation Guide
Dimensions
1. Remove the cover from the base at the bottom of the device.
2. Position the sensor base vertically on the wall 1.35 m (4.5 ft.) above the oor with the “UP” arrow facing upward. Locate away
from windows, vents and other sources of draft. If possible, do not mount on an external wall, as this may cause inaccurate
temperature readings.
3. Pull 18 or 22 AWG cable(s) through the hole in the backplate.
Installation
Functions
115
(4.5)
85
(3.3)
24
(0.9)
The HW2 Series sensor measures the RH and temperature in a room and provides analog outputs to a controller.