Install Instructions

Z207932-0C Page 9 of 12 ©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [e-mail] 0920
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
CW2 Protocol Series Installation Guide
Touchscreen Operation
Main Screen
The touchscreen user interface displays applicable sensor output values (temperature, RH, CO2 and VOC), setpoint value, menu
button and CO2 stoplight status (if enabled).
Setpoint value (temperature setpoint shown)
RH value
Fahrenheit/Celsius
Temperature value
Menu button
CO
2
value
VOC AQI value
Menu Screen
The menu screen opens when pressing the Menu button on the main screen. Integrator’s submenu, occupancy/override,
Fahrenheit/Celsius, settings, setpoint submenu (temp, RH and fan) and CO stoplight buttons are displayed on the menu screen.
Note: RH setpoint will
not appear on non-RH
models.
Menu Button Functions
Integrator’s Submenu
Press this icon to access the
Integrator’s menu.
Submenu Only
Occupied Override Button
Press this icon to provide
momentary signal output to
the controller
Signals occupied/override
call to controller.
Single Press Only
Fahrenheit/Celsius Switch
Press this icon to display either
°C or °F.
Changes units to
Fahrenheit when pressed.
Changes units to
Celsius when pressed.
Single Press Only
ModelCW2TP2AV
Serial #4E54F3B5
2020Date code
01ARev code