Install Instructions

Z207932-0C Page 11 of 12 ©2020 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [e-mail] 0920
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
CW2 Protocol Series Installation Guide
LCD Display Operation
Setpoint Function
Button Functions
Display Icons
The main screen displays sensor values for CO, VOC (if equipped), RH (if equipped), temperature and Celsius/Fahrenheit.
The Menu Advance button cycles between Temperature, RH (if equipped), Fan Speed setpoints and Celsius/Fahrenheit adjustment
screens in order.
Temperature Setpoint Adjustment
RH Setpoint Adjustment
Change Values
Menu Advance
Change Values
Alternates between CO
2
and VOC
every 6 seconds
Humidity Value
(if equipped)
Temperature
Value
Override Press
Indicator
CO
2
Value
VOC Value
(if equipped)
Adjusts setpoint up
Adjusts setpoint down
Note: Numeric information will ash while in S
et mode.
Press the Menu
Advance button
After adjustment, wait 6 seconds or press the Menu Advance button.
Setpoint is accepted and main screen appears.
Adjusts setpoint up
Adjusts setpoint down
Press the Menu
Advance button
Note: Numeric information will ash while in S
et mode.
After adjustment, wait 6 seconds or press the Menu Advance button.
Setpoint is accepted and main screen appears.