Install

59 40060 UINT32 input 6 max LSW
60 40061 UINT32 input 7 max MSW (rate-max, status max, max, max)
61 40062 UINT32 input 7 max LSW
62 40063 UINT32 input 8 max MSW (rate-max, status max, max, max)
63 40064 UINT32 input 8 max LSW
Mode setting options. see above for value details.
64 40065 UINT16 input 1 mode (NV/r/w)
65 40066 UINT16 input 2 mode (NV/r/w)
66 40067 UINT16 input 3 mode (NV/r/w)
67 40068 UINT16 input 4 mode (NV/r/w)
68 40069 UINT16 input 5 mode (NV/r/w)
69 40070 UINT16 input 6 mode (NV/r/w)
70 40071 UINT16 input 7 mode (NV/r/w)
71 40072 UINT16 input 8 mode (NV/r/w)
72 40073 UINT16 input status bitmap. (pulse/status modes only)
73 40074 UINT16 input broken wire alarm bitmap. (resistance, current modes only)
Restive mode: bit set when resistance is off-scale-high.
4-20mA mode: bit is set when current is below 4mA.
74 40075 UINT16 relay output 1 (r/w) 0=open, 1=closed,
defaults to open on power-up.
r/w allowed when register 41030 = 0.
75 40076 UINT16 relay output 2 (r/w) 0=open, 1=closed
--- system settings and information ---
999 41000 UINT16 contact closure threshold (NV/r/w) in ohms, default 1000 = 1kohm.
(minimum value 100 ohms, maximum value 5000 ohms)
1000 41001 UINT16 contact open wire threshold (NV/r/w) in ohms,
default/unused = 0xFFFF, limit 100 to 10,000 ohms.
1001 41002 UINT16 number of pulses for inst rate (NV/r/w) default 5.
limit 2 to 20.
1002 41003 UINT16 serial number bytes 1,2
1003 41004 UINT16 serial number bytes 3,4
1004 41005 UINT16 serial number bytes 5,6
1005 41006 UINT16 firmware version (major)
1006 41007 UINT16 firmware version (minor)
1007 41008 UINT32 Reserved
1008 41009 UINT32 Reserved
1009 41010 INT16 Reserved
1010 41011 INT16 Reserved
1011 41012 UINT32 uptime MSW number of seconds since IO module booted.
1012 41013 UINT32 uptime LSW
1013 41014 UINT16 hardware version (major) for example: 8332
1014 41015 UINT16 hardware version (minor) MSB = pcb rev, LSB = part rev.
value 1=Rev_A, 2=Rev_B, etc.
1015 41016 UINT32 hardware Date of Manufacture (MSW)
1016 41017 UINT32 hardware Date of Manufacture (LSW)
time, UTC, unix epoch, seconds past 1970.
1017 41018 UINT16 RS485 Stats: Good RX (all packets received)
1018 41019 UINT16 RS485 Stats: Total TX
1019 41020 UINT16 RS485 Stats: TX failed
1020 41021 UINT16 clear min/max/ave (r/w) read returns 0, write any value to clear
min/max/ave for all channels.
1021 41022 UINT8 reserved
1022 41023 UINT8 reserved
1023 41024 UINT8 reserved
1024 41025 UINT8 reason for reboot. 0x01=POR, 0x02=EXTR 0x04=WDTR 0x08=BODR,
0x8000=WDTOF
Page 13 A8332-8F2D