User guide

Using the Nextiva S5500 IP PTZ Preset
Commands
Use the keypad controller preset commands to quickly execute specific
functions or perform setting changes.
+Preset: press the PRESET key once.
+Set Preset: press and hold the PRESET key for two seconds.
Note
Different keypad controllers may have different preset button combinations.
Please refer to the keyboard instruction manual for key combinations.
The following table lists the button combinations and the corresponding
functions for use with keypad controllers: Messoa-P, Messoa-D, Pelco P, Pelco
D, Bosch, and Ernitec protocol.
Number + Key Press
a
Function
0~3235~66111~255+Preset Move camera to preset point 0~32,35~66,
111~255
33+Preset Flip
34+Preset Return to origin
70+Preset Begin auto patrol–Group1
90+Preset Begin auto patrol–Group2
91+Preset Begin auto patrol–Group3
92+Preset Begin auto patrol–Group4
71+Preset Backlight compensation ON
72+Preset Backlight compensation OFF
73+Preset White balance–one push
74+Preset Focus–one push
75+Preset Show software version
76+Preset Self test
88+Preset Color mode (daytime)
89+Preset Monochrome mode (nighttime)
a
123+ Preset is unavailable
Only 211 points can be preset and there are 20 points preserved for future
use such as 67~69, 77~82, 84~87, 94, 100, 106~110.
Using the Nextiva S5500 IP PTZ Preset Commands
98 © 2013 Verint Video Systems Inc.