User guide

► To set the Password:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <SYSTEM>, and then press the [OPEN] key <SYSTEM>

menu.

3. Move the cursor to <PASSWORD>, and then press the [OPEN] key the

<PASSWORD> menu.

4. Move the cursor to PASSWORD ENABLE and press the key to enter the

option. Use the joystick up/down to set ON or OFF.

5. If ON is selected, please enter the password. Press the key to enter the

PASSWORD menu.

6. Move the joystick up/down to set the password.

7. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Power Up Mode

<SYSTEM> → POWER UP

The camera can be configured to different moves after power up:

PARK: The camera will move to the first preset position.

AUTO SCAN: The camera will run auto scan.

FRAME SCAN: The camera will run frame scan.

RANDOM SCAN: The camera will run random scan.

AUTO PATROL: The camera will run auto patrol.

PATTERN 1: The camera will run pattern 1.

BY DEFAULT: The speed dome would return to default setting after power

on. Ex, if the default setting is Auto Scan, the speed dome would run Auto

Scan after power on.

SCHEDULE: If the default setting is SCHEDULE, the speed dome would run

the path setting in SCHEDULE after power on.

Note

1. If Recover Time is enabled, the speed dome would still enable Recover

Time function after power on.

2. When a schedule mode is ON and within the schedule time interval, the

dome will still perform scheduling after power up from abnormal power

lost; regardless of the setting for power on Menu.

Power Up Mode