User guide

Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Setting up the Additional Functions

Freeze Activity

<OTHERS> → FREEZE ACTIVITY

When the camera is in frame, random, auto, or preset scanning modes, the

camera screen can be disabled during movement, and the screen image will

only be shown until the camera reaches the stop point.

► To set Freeze Activity:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <OTHERS>, and then press the [OPEN] key <OTHERS>

menu.

3. Move the cursor to the FREEZE ACTIVITY selection and then press the

[OPEN] key.

4. Move the joystick up/down to set ON or OFF.

5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Scan Tilt Angle

<OTHERS> → SCAN TILT ANGLE

The camera tilt angle can be configured for different application requirements.

► To set the Tilt Angle:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <OTHERS>, and then press the [OPEN] key <OTHERS>

3. Move the cursor to the SCAN TILT ANGLE selection and then press the

Chapter 4: Configuring the Nextiva S5500 PTZ Series Properties