User guide

► To set the Title:
1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu
screen.
2. Move the cursor to <CAMERA TITLE>, and then press the [OPEN] key
<CAMERA TITLE> menu.
3. Move the cursor down to CAMERA TITLE INPUT, and then press the key. Use
the joystick up/down to select the character.
4. Move the cursor down to CAMERA TITLE, and then press the key to select
either ON or OFF. If OFF is selected, then the camera title will not be shown.
5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to
cancel selection and exit from the menu screen.
Setting Up the Presets
<PRESET SETUP>
Auto Patrol
<PRESET SETUP> → AUTO PATROL
The auto patrol function will continuously scan up to 256 preset positions and is
not limited by the scan range.
► To activate the Auto Patrol:
1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu
screen.
2. Move the cursor to <PRESET SETUP>, and then press the [OPEN] key
<PRESET SETUP> menu.
3. Move the cursor to the AUTO PATROL selection and then press the [OPEN]
key.
4. Move the joystick up/down to choose the position, and left/right to set ON or
OFF.
5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to
cancel selection and exit from the menu screen.
Preset Speed
<PRESET SETUP> → PRESET SPEED
Setting Up the Presets
88 © 2013 Verint Video Systems Inc.