User guide

► To set the Max Speed:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <PAN/TILT SETUP>, and then press the [OPEN] key

<PAN/TILT SETUP> menu.

3. Move the cursor to the MAX SPEED selection and then press the [OPEN] key.

4. Move the joystick up/down to set the speed.

5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Setting Group

<PAN/TILT SETUP> → GROUP

For convenience of key press controls, the unit provides 4 sets of preset auto

patrol group configurations.

GROUP 1: Press “70”+ [PRESET] key to run first auto patrol group.

GROUP 2: Press “90”+ [PRESET] key to run second auto patrol group.

GROUP 3: Press “91”+ [PRESET] key to run third auto patrol group.

GROUP 4: Press “92”+ [PRESET] key to run fourth auto patrol group.

► To set the Preset Group:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <PAN/TILT SETUP>, and then press the [OPEN] key

<PAN/TILT SETUP> menu.

3. Move the cursor to the GROUP selection and then press the [OPEN] key.

4. Move the joystick up/down to set the group.

5. Move the joystick left/right to choose the start position (S), move up/down

to set the preset point.

6. Move the joystick left/right to choose the end position (E), move up/down to

set the preset point.

7. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Setting the Camera Title

<CAMERA TITLE> → CAMERA TITLE INPUT

Chapter 4: Configuring the Nextiva S5500 PTZ Series Properties