User guide

► To Set the Scan Speed:
1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu
screen.
2. Move the cursor to <PAN/TILT SETUP>, and then press the [OPEN] key
<PAN/TILT SETUP> menu.
3. Move the cursor to the SCAN SPEED selection and then press the [OPEN]
key.
4. Move the joystick up/down to set the speed.
5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to
cancel selection and exit from the menu screen.
Setting Stop Time
<PAN/TILT SETUP> → STOP TIME
Under random, frame, or auto scan modes, the STOP TIME can be set. During
scanning, the camera will pause at each stop position from 5 sec to 120 sec.
► To set the Stop Time:
1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu
screen.
2. Move the cursor to <PAN/TILT SETUP>, and then press the [OPEN] key
<PAN/TILT SETUP> menu.
3. Move the cursor to the STOP TIME selection and then press the [OPEN] key.
4. Move the joystick up/down to choose the position, and left/right to set the
time.
5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to
cancel selection and exit from the menu screen.
Setting Max Speed
<PAN/TILT SETUP> → MAX SPEED
The max speed for horizontal pan/vertical tilt can be configured between 1° to
430° /sec. To lower the amount of noise, it is recommended that a lower speed
be used.
Setting Stop Time
86 © 2013 Verint Video Systems Inc.