User guide

Setting Up Horizontal Pan and Vertical Tilt

The following section describes how to configure the Horizontal Pan and Vertical

Tilt.

Setting Auto Flip

<PAN/TILT SETUP> → AUTO FLIP

The auto flipping function will enable the camera to quickly flip 180° in the

vertical direction. Objects moving under the camera can be tracked without

interruption.

► To activate 180° Auto Flip:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <PAN/TILT SETUP>, and then press the [OPEN] key

<PAN/TILT SETUP> menu.

3. Move the cursor to the AUTO FLIP selection and then press the [OPEN] key.

4. Move the joystick up/down to choose ON or OFF.

5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Setting Proportional P/T

<PAN/TILT SETUP> → PROPORTIONAL P/T

Proportional P/T enabled to let the camera to adjust the horizontal pan/vertical

tilt speed according to the zoom level. When zoomed in, the horizontal and

vertical speed will be slowed down so as to keep the image from moving too

rapidly.

► To activate the Proportional P/T: