User guide

The camera can use the power line frequency as the sync signal source.

Line Lock can be set to ON or OFF

Line Phase range between 40° ~ 250°

► To set the line lock:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <CAMERA SETUP>, and then press the [OPEN] key

<CAMERA SETUP> menu.

3. Move the cursor to <LINE LOCK>, and then press the [OPEN] key <LINE

LOCK> mode selection.

4. Move the cursor to the selection and then press the [OPEN] key.

5. Move the joystick up/down to choose the selection.

6. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Setting Privacy Zones

<CAMERA SETUP> → PRIVACY ZONES

This feature can enable the user to black out (or white out) a specific portion of

the screen to protect the necessary privacy. The size and position of these

frame areas can be adjusted according to the horizontal pan, vertical tilt, and

lens zoom of the camera. Up to 24 frame zones can be configured.

► To set a privacy zone:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <CAMERA SETUP>, and then press the [OPEN] key

<CAMERA SETUP> menu.

3. Move the cursor to PRIVACY ZONE, and then press the [OPEN] key the

selection.

4. Move the joystick up/down to set the P1~P24 ON/OFF selection.

5. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Setting Privacy Zones