User guide

DAY/NIGHT mode can be either automatic or manual. To improve nighttime

sensitivity, the infrared filter in the camera lens can be removed. When set to

auto mode, the camera will automatically adjust according to the

environment brightness; under manual mode, directly press the keys number

“88”+ [PRESET] key = Daytime color mode; number “89”+ [PRESET] key =

Nighttime monochrome mode.

FLICKERLESS: ON or OFF.

Note

BLC function is selectable: ON/OFF, or refer to hotkey operation. For dome

with WDR, the selection for BLC function would be: ON/OFF/WDR (For WDR

model only).

► To set the auto exposure:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <CAMERA SETUP>, and then press the [OPEN] key

<CAMERA SETUP> menu.

3. Move the cursor to AE, and then press the [OPEN] key to enter AE mode

selection.

4. Move the cursor to the selection and then press the [OPEN] key.

5. Move the joystick up/down to choose the selection.

6. Press the [OPEN] key to confirm the selection or press the [CLOSE] key to

cancel selection and exit from the menu screen.

Setting the Zoom Limit

<CAMERA SETUP> → ZOOM LIMIT

Directly set as wide or tele mode.

Zoom levels: up to X36.

Max optical zoom level is X36, digital zoom level starts from X72 to X432.