User guide

Setting Up the Camera

The following section provides information on setting up the camera.

Setting the Focus

<CAMERA SETUP> → <FOCUS> → Mode

Use the [NEAR] or [FAR] keys to control the Focus.

One push auto focus feature.

Four focus modes to choose from: Manual, Auto, Interval, and Zoom.

Under manual focus, use the [NEAR] and [FAR] keys to control the Focus.

Under auto focus mode, press the [NEAR] or [FAR] keys to switch to manual

focus mode until the commands for lens zoom, horizontal, and vertical

rotate button control signals are received.

Under interval mode, the camera will switch between auto focus and manual

focus modes according to the Active time and Interval time settings: Active

Time (auto) → Interval Time (manual) → Active Time (auto) → Interval

Time (manual). 5

Interval and Active time settings range between 0 and 255 seconds.

Under Zoom trigger mode, the camera will remain under manual focus

mode until the control signals for [ZOOM IN] or [ZOOM OUT] are received

from the keypad. After the action is carried out, the camera will return to

manual focus mode.

Auto focus sensitivity can be set to Normal or Low.

► To set the focus setting:

1. Press “95” + hold the [PRESET] key for 2 seconds to enter the main menu

screen.

2. Move the cursor to <CAMERA SETUP>, and then press the [OPEN] key to

enter <CAMERA SETUP> menu.

3. Move the cursor to <FOCUS>, and then press the [OPEN] key to enter

<FOCUS> menu.

4. Move the cursor to <MODE>, and then press the [OPEN] key to enter mode

selection menu.

5. Move the joystick up and down to choose the function to use.

6. Press the [OPEN] key to confirm, or press [CLOSE] to cancel selection and

exit from the menu screen.

Setting Up the Camera