User guide
Safety
Always observe the following precautions to reduce the risk of injury and
equipment damage:
Do not touch the Nextiva S5500 PTZ series during a lighting storm. During
prolonged inactivity, please unplug the power cable and the video cable to
avoid damage from lightning strike and power surges.
Only use the recommended power cable for powering the Nextiva S5500
PTZ series.
Turn off the Nextiva S5500 PTZ series as soon as smoke or unusual odors
are detected.
Keep the Nextiva S5503PTZ-18ID models away from water. If it become
wet, turn off immediately.
Do not place the Nextiva S5500 PTZ series near a heat source.
Do not place the Nextiva S5503PTZ-18ID models in a high humidity
environment.
Keep the Nextiva S5503PTZ-18ID PTZ IP cameras away from direct
sunlight.
Do not disassemble the Nextiva S5500 PTZ series.
Do not drop the Nextiva S5500 PTZ series.
Do not insert sharp or tiny objects or spill liquids into the Nextiva S5500 PTZ
series to avoid short circuits.
The operating temperature for the Nextiva S5503PTZ-28DW and S5503PTZ-
36DW models: -40°F to 122°F (-40°C to 50°C), with maximum humidity at
90% relative, non-condensing.
The operating temperature for the Nextiva S5503PTZ-18ID models: 14°F to
122°F (-10°C to 50°C).
Do not place the Nextiva S5500 PTZ series on an unstable cart, tripod, or on
a tabletop as personal injury and damage to the unit may occur due to a fall.
Please use officially certified support, frames, and accessories included with
the product. Follow the instructions in this Instruction Manual during
installation to ensure the quality and maintain safety.
Please follow the labelled specifications on the Nextiva S5500 PTZ series
and supply with the correct power. If unsure of the actual power
requirements, please contact the distributor and do not connect the power at
will.
The power cable must be properly secured as improper connections may
cause a short
© 2013 Verint Video Systems Inc. 6