User guide

► To set the video standard

1. Start the Web Interface.

2. From the tree, select Configuration >Video.

3. From the Video standard list, select the analog display standard of the

region. You can select from the following:

NTSC

PAL

Note

Changing the video standard requires a reboot. A dialog box appears warning

you of the changes to the video standard.

4. Click Yes to make the changes.

5. Click Apply.

6. Click OK to reboot the Edge device.

Configuring the Encoder Properties

For each video input, the S1800e series devices can send video with different

sets of parameters to different locations. The single/dual port devices support

quad-stream encoding with three streams using H.264 compression and one

using MJPEG compression. The multiport devices support triple-stream

encoding provides two streams using H.264 compression and one using MPEG4

compression. You can customize each device in terms of frame rate and

resolution to meet each system requirements.

Chapter 3: Configuring the IP Settings