User guide

Setting a Static IP Address

If you plan on using the S1800e series devices with the Nextiva video

management software, you need to disable the DHCP setting and manually set

a static IP address.

► To set a static IPaddress

1. Start SConfigurator.

2. Select the Units tab, then click Discover.

3. Select the Nextiva device, and click Configure.

4. In the tree view, click Unit >Network > IP.

5. Select Use the following IP address.

6. In the IP Address box, type the device IP address.

7. In the Subnet Mask box, type the address specifying the subnet in which

the IP address belongs.

8. In the Gateway box, type the IP address of the server that acts as an

access point to another network.

Note

You do not need to use a gateway if the device communicates with other

devices on the same subnet.

Chapter 3: Configuring the IP Settings