User guide

► To install the Nextiva S5500 PTZ Outdoor IP Cameras on a pole:

1. Remove the dome cover from the PTZ camera using the supplied

screwdriver.

2. Remove the lens cover and the foam protector.

3. Thread the metal strap through the rectangular holes on the corner support.

4. Use a Philips screwdriver to tighten the metal strap, and then line up the

holes on the wall mount box to the holes on the support.

5. Secure the wall mount to the metal plate.

6. Remove the connector ring from the PTZ camera and replace with the

connector ring that comes with the support.

7. Fasten the connector ring to the wall hang support in the clockwise

direction.

Chapter 2: Installing the Nextiva S5500 PTZ series