User guide

Installing the Nextiva S5500 PTZ Series

This section explains how to mount the Nextiva S5500 PTZ series on a wall,

pole or ceiling.

Tip

Before installing the camera, look for a shooting area that best suits your

needs.

Installing the Nextiva S5500 PTZ Outdoor IP

Cameras

This section explains how to install the Nextiva S5503PTZ-28DW or S5503PTZ-

36DW models.

Note

The mounting hardware must be ordered separately.

► To install the Nextiva S5500 PTZ Outdoor IP Cameras on the wall:

1. Remove the dome cover from the PTZ camera using the supplied

screwdriver.

2. Remove the lens cover and the foam protector.

3. Drill four pilot holes on the wall matching the mount holes on the plate.

4. Secure the plate to the wall.

5. Remove the connector ring from the PTZ camera and replace with the

connector ring that comes with the support.

Chapter 2: Installing the Nextiva S5500 PTZ series