User guide

Note

The Ethernet Adapter 2 tab corresponds to LAN 2 on the S1808e, S1808e-A,

S1816e, S1816e-A and S816e-SPencoders, and is used by support for

debugging purposes. The S1816e-SRmodel does not have a second Ethernet

port.

The default IP address of LAN 2 is set to 172.29.204.254 with subnet mask

255.255.255.252. Any computer connecting to the S1800e multiport encoders

must use the following IP address 172.29.204.253.

Configuring the Serial Ports

Once the serial equipment is connected to the device, you need to ensure that

both devices can communicate with each other.

Note

For complete information about serial port parameters and the settings to use,

refer to the serial equipment documentation or contact the product

manufacturer.

Configuring the RS-232 Serial Port

Use the following procedure to configure an RS-232 device using the Web

Interface.

Chapter 5: Using the Web Interface for Configuration