User guide

Once you have connected all the equipment to the device, you can begin
configuring the device to ensure that it can communicate with the attached
devices and with a video management software over the network. In order to
configure the device, you first need to obtain the IP address using
SConfigurator.
The S1800e series devices have a self-contained web server allowing you to
connect directly to it using a web browser. The Web Interface is a browser-
based tool that allows you to configure the S1800e series devices. For complete
information on the Web Interface, refer to the Web Interface User Guide.
Note
The default username and password for the Web Interface is admin. We
recommend that you change the default password for the Edge device to a
more secure password.
The following topics are discussed:
IP Address Configuration 85
Configuring the Serial Ports 90
Setting the Video Standard 92
Video Profile 96
Setting the SNMP Properties 104
Audio Properties 107
Activating Nextiva Onboard Analytics 112
Configuring Nextiva Onboard Analytics 114
Activating Agent Vi Video Analytics 115
Configuring Agent Vi Video Analytics 117
Setting the On-Screen Display for the Decoders 118
Recording to the Storage Device 119
Chapter
5
Chapter 5: Using the Web Interface for
Configuration