User guide

10. In the Community Name box, type the name of the group where you want

the edge device to be a member.

Note

The Edge device will only respond to requests from management servers that

belong to the same community.

11. In the SNMPv3 User Name box, type the name of the SNMP user.

12. In the SNMPv3 User Authentication Type list, select the authentication

algorithm for SNMP requests. You can select from the following:

No Authentication:No authentication is used.

MD5 Authentication:The Message Digest Version 5 (MD5) hash

function is used to determine that the message is from a valid source.

SHA Authentication:The Secure Hash Algorithm (SHA) has function is

used to determine that the message is from a valid source.

13. In the SNMPv3 User Auth Password box, type a password for the user.

14. In the SNMPv3 Privacy Protocol list, select the privacy protocol to

encrypt the contents of the data. You can select from the following:

No Encryption:No encryption is used.

DES Encryption:The Data Encryption Standard (DES) algorithm is used

to encrypt the data.

AES Encryption:The Advanced Encryption Standard (AES) algorithm is

used to encrypt the data.

15. In the SNMPv3 Privacy Password box, type a password for the privacy

protocol.

16. Click Apply.

17. Click Close.

Note

The device will reboot.

Audio Properties

The S1801e, S1802e, S1808e-A and S1816e-A supports bi-directional audio:

audio input and output. Audio input allows you to capture audio signals from a

camera, provided that it supports audio, at the same time it captures video.

Currently, the S1800e series devices support the following audio formats:

Chapter 4: Using SConfigurator for Configuration