User guide

► To configure the devcie video properties

1. Start SConfigurator.

2. Select the Units tab, then click Discover.

3. Select the Nextiva device, and click Configure.

4. In the tree view, click Unit >Video >Input >Encoder.

5. For each input, set the values for the following:

Target Bit Rate:The rate in kbps at which the device sends data. Use a

higher bit rate to record movements, noise and details. The bit rate can

range from 9 kbps to 6000kbps.

Target Frame Rate:The number of frames captured or recorded each

seconds.

NTSC:select from: 1, 2, 3, 3.75, 5, 6, 7.5, 10, 15, or 30 fps.

PAL:select from: 1, 2.5, 5, 6.75, 8.33, 12.5, or 25 fps

Quantizer (Minimum and Maximum):The process of safely

discarding information from a video without a significant loss in visual

quality. Using a higher quantizer value decreases video quality and

creates a smaller file size. Using a low quantizer value increases video

quality and creates a larger file size. The available range is between 2

and 31.

Configuring the Device Video Properties