User guide

► To configure the H.264 encoding mode

1. Start SConfigurator.

2. Select the Units tab, then click Discover.

3. Select the Nextiva device, and click Configure.

4. In the tree view, click Unit.

5. In the Unit Name box, from the Performance Mode list, select the H.264

streaming mode. You can select from:

Single H.264:A single high-performance H.264 stream and a single

MPEG-4 stream per video input.

Single H.264 (Legacy):A single high-performance H.264 stream and a

single MPEG-4 stream per video input.

Dual H.264:Two H.264 streams with lower resolution and framerate

and a single MPEG-4 stream per video input.

6. Click Reboot Unit for the change to take effect.

7. Click OK to close the Unit Configuration dialog box.

8. Click Exit.

Caution

Once you have added the S1816e--SP or S1816e-SR to Nextiva Control

Center, changing the mode requires that you delete the device from

Nextiva Control Center and then use SConfigurator to change the mode;

you will be required to add the device again in Nextiva Control Center.

Setting the H.264 Encoding Mode for the S1816e-SP or S1816e-SR