User guide

Setting a DHCPIP Address 60
Setting a Static IP Address 60
Configuring the Serial Ports 62
Configuring the RS-232 Serial Port Using SConfigurator 62
Configuring the RS-422/485 Serial Port Using SConfigurator 66
Setting the H.264 Encoding Mode for the S1816e-SP or S1816e-SR 70
Setting the Video Standard 72
Video Profile 74
Configuring the Device Video Properties 74
Configuring the Input Properties 77
Setting the SNMP Properties 78
Audio Properties 80
Setting the Audio Sampling Rate 81
Setting the Audio Encoder Properties 82
Setting the Audio Decoder Properties 83
Chapter 5: Using the Web Interface for Configuration 84
IP Address Configuration 85
Setting a DHCPIP Address 85
Setting a Static IP Address 87
Configuring the Serial Ports 90
Configuring the RS-232 Serial Port 90
Configuring the RS-422/485 Serial Port 91
Setting the Video Standard 92
Configuring the Encoder Properties 94
Video Profile 96
Configuring the Encoder Properties 96
Configuring the Input Properties 99
Configuring the Camera Tampering Properties 100
Configuring the Motion Detection Properties 101
Configuring the Decoder Properties 102
Configuring the Video Output Properties 103
Setting the SNMP Properties 104
Viewing MIB Information 106
Audio Properties 107
Setting the Audio Sampling Rate 108
Setting the Audio Input Properties 108
Setting the Audio Encoder Properties 109
Setting the Audio Output Properties 110
Setting the Audio Decoder Properties 111
Activating Nextiva Onboard Analytics 112
Configuring Nextiva Onboard Analytics 114
Activating Agent Vi Video Analytics 115
Configuring Agent Vi Video Analytics 117
Setting the On-Screen Display for the Decoders 118
Recording to the Storage Device 119
Chapter 6: Maintaining and Troubleshooting the Device 121
Firmware Upgrade 122