User guide

Setting SConfigurator

Before you can use SConfigurator to discover devices on the network, you need

to set the initial parameters.

► To set SConfigurator

1. Download the latest version of SConfigurator.

2. Extract the executable file (SConfigurator.exe) to the desktop.

3. Double-click SConfigurator.exe to start SConfigurator.

4. In the General tab, click Program Options.

5. Select the IP address of the correct LAN interface from IP Address of the

PC list.

SConfigurator automatically detects the IPaddress unless you are using two

Ethernet cards or are using virtual private network (VPN).

6. Select Detect All Units on LAN.

SConfigurator will discover all devices connected to the same LAN as the PC

and having the same VSIP port as SConfigurator will be discovered, even

those whose IP addresses are not part of the same subnet as the computer.

This parameter works only with the broadcast detection method.

SConfigurator automatically switches to broadcast, even if the Discovery

IP Address box displays the multicast address.

7. Ensure that the VSIP Port is 5510; otherwise, click Default. This port

number must be the same in SConfigurator and in the devices to be

configured. The default VSIP port is 5510.

Setting SConfigurator