User guide

Once you have connected all the equipment to the device, you can begin
configuring the device to ensure that it can communicate with the attached
devices and with a video management software over the network. In order to
configure the device, you first need to obtain the IP address using
SConfigurator.
SConfigurator is a PC-based administration tool that you can use over any
TCP/IP network.
Caution
Any changes made using the video management software will override the
changes made using SConfigurator or the Web Interface.
The following topics are discussed:
Setting SConfigurator 57
Discovering Devices 58
IP Address Configuration 59
Configuring the Serial Ports 62
Setting the H.264 Encoding Mode for the S1816e-SP or S1816e-SR 70
Setting the Video Standard 72
Video Profile 74
Configuring the Device Video Properties 74
Configuring the Input Properties 77
Setting the SNMP Properties 78
Audio Properties 80
Chapter
4
Chapter 4: Using SConfigurator for
Configuration