User guide

Package Contents

Each installation kit contains the following:

One S1808e, S1808e-A, S1816e, S1816e-A, S1816e-SP or S1816e-SR device

One set of rack-mount brackets with four screws (Philips M3 × 6mm pan

head)

One Nextiva S1800e series Quick Installation Guide

Optional Accessories

You can order the following power supplies when purchasing the multiport

encoders:

PS1261: Efficiency level V compliant power supply for S1800e series

multiport devices.

PS1281: 19-inch rack mountable power supply for up to ten multiport

devices.

PS1282-10: 19-inch rack mountable power supply for up to 10 - S1800e

series multiport devices.

PS1282-20: 19-inch rack mountable power supply for up to 20 - S1800e

series multiport devices.

PDP10-2: 19-inch 1U power distribution panel rack mount to connect up to

ten S1800e series devices

Installing on a Flat Surface

This section explains how to install the S1800e on a desktop or flat surface.

► To install on a flat surface

1. Remove any debris and dust from the surface as well as the surrounding

area.

2. Place the device on the flat surface.

3. Ensure that you have access to both the front and rear of the device and that

the fan airflow is not blocked.

Package Contents