User guide

Package Contents

Each installation kit contains the following:

One S1801e, S1801e-PoE, S1802e, S1801e-R or S1801e-R-HD device

One set of rack-mount brackets with four screws (Philips M3 x 6mm pan

head)

One Nextiva S1800e series Quick Installation Guide

PS12: Efficiency level V compliant power supply

Optional Accessories

You can order the following power supplies when purchasing the encoder or

decoder:

VRM8: 19-inch rack mount panel for eight units (single- or dual-ports

devices)

PSPOE: 802.3af compliant Power over Ethernet injector

Installing on a Flat Surface

This section explains how to install the S1800e on a desktop or flat surface.

► To install on a flat surface

1. Remove any debris and dust from the surface as well as the surrounding

area.

2. Place the device on the flat surface.

3. Ensure that you have access to both the front and rear of the device and that

the fan airflow is not blocked.

Installing in a Rack

This section explains how to install the device in a rack.

Package Contents