User guide

Configuring the Input/Output Terminals

The rear panel of the S1800e series devices has 1, 2, 8 or 16 dry contact inputs

and 1, 2 or 4 relay output terminals for triggers and alarms depending on the

model. Using a video management software such as Nextiva Video

Management Software, you can create scenarios with Nextiva VMS Event

Manager to generate a response through the relay outputs to pre-defined

system and motion events detected in Nextiva from sensors connected to the

dry contact inputs. For complete information on using the Nextiva VMS Event

Manager, refer to the current Nextiva VMS Administration Guide.

Configuring the Input/Output Terminals