User guide

LED Pattern Description
Flashing green (0.2
sec. intervals)
The firmware has started, the encoder is connected to
the network, and serial data is transmitted.
Flashing green (3 sec.
intervals)
The firmware has started, but the encoder is not
connected to the network.
Flashing green-red (1
sec. intervals)
The encoder is undergoing a firmware update.
Flashing red (0.1 sec.
intervals)
The encoder is being identified.
Flashing orange (1
sec intervals)
The encoder failed to boot normally and entered
recovery mode. The firmware needs to be updated
through SConfigurator or the Web Interface. The
encoder is using the static IP address assigned by the
user.
Flashing orange (3
blinks at 1 sec
intervals) and 2 quick
red pulses (0.5 sec
interval)
The encoder failed to boot normally and entered
recovery mode. The firmware needs to be updated
through SConfigurator or the Web Interface. The
encoder is using the APIPA addressing format.
Flashing red-orange
(1 sec intervals)
There is an internal error that is preventing the
encoder from starting normally. Shut down the
encoder, wait 30 seconds, then start it again. If the
condition persists, call Verint Video Solutions support.
LED not lit Check the power supply and cabling. If power is
available and the LED stays off, call Verint Video
Solutions support.
Video Status LEDs
The video status LEDs provides a visual indication on the current state of the
video connection between the encoder and each analog video source.
LED Pattern Description
Steady green An analog video source is connected to the corresponding
input but video is not transmitted.
Flashing green
(0.2sec. interval)
An analog video source is connected to the corresponding
input and encoded video is transmitted.
Steady Red No analog video source is detected on the corresponding
input and encoded video is not transmitted.
Flashing red (0.2
sec. intervals)
No analog video source is detected on the corresponding
input but encoded video (red/blue frame) is transmitted.
Video Status LEDs
29 © 2013 Verint Video Systems Inc.