User guide

► To reboot from the front panel

1. On device, press Reset.

Factory Default Settings

If after rebooting the device still does not function the way it should, you can

load the factory default configuration. This operation will restore the factory

default settings to the device and delete all user-defined values.

Restoring the Factory Default Settings Using

SConfigurator

Use the following procedure to restore the factory default settings using

SConfigurator.

► To restore the factory default settings using SConfigurator

1. Start SConfigurator.

2. Select the Units tab, then click Discover.

3. Select the device, and click Configure.

4. Click Load Default Settings.

5. Click OK.

Restoring the Factory Default Settings Using

the Web Interface

If after rebooting the device still does not function the way it should, you can

load the factory default configuration. This operation will restore the factory

default settings to the device and delete all user-defined values.

Chapter 6: Maintaining and Troubleshooting the Device