User guide

► To record to the storage device

1. Start the Web Interface.

2. From the tree, select Configuration >Storage.

3. Select one of the following:

No recording: No recording is done on the storage device.

Upon VMS disconnection: Recording is done when the device is

disconnected from Nextiva VMS. Select from one of the following.

Low: CIF, 88 kbps, MinQ 12, MaxQ 22, CFR, Skip rate 4

Medium: 2CIF, 172 kbps, MinQ 12, MaxQ 22, CFR, Skip rate 4

High: 2CIF, 400 kbps, MinQ 12, MaxQ 22, CFR, Skip rate 2

Continuous recording: Recording is done on the storage device at the

same time as recording to Nextiva VMS.

4. From the Device Management list, select the storage device.

Note

If the recording device is full, click Clear to delete data from the recording

device.

5. Click Apply.

Chapter 5: Using the Web Interface for Configuration