User guide

5. In the Display Logo list, choose to show the Verint logo on the monitor

during the device start up. Choose from:

Displayed

Not Displayed

6. In the Transparency box, type a value to the set transparency level of the

text on the monitor.

7. From the Tiles tab, for each tile, set the following:

a. In the Starve Mode list, select what to display on the monitor when

there is no video. You can select from:

Screen Saver

Black

Last Decoded Image

b. In the Show Transmitter Name list, select whether or not to show the

device name. Choose from the following

c. In the Transmitter Name box, type the name you want to show.

8. Click Apply.

Recording to the Storage Device

The encoders now support storage on the edge - a failover mechanism that

ensures video is recorded in case connection with the management software is

lost. The single- and dual-port encoders support microSDcards with a

maximum capacity of 32 GB. The mulitport encoders support one USB drive.

Note

The S1816e-SRdoes not support recording to a USBdrive.

Recording to the Storage Device