User guide

Configuring Agent Vi Video Analytics

Once activated, you can configure Agent Vi Video Analytics on eight video

inputs and enable or disable the overlay markup. For complete information on

using Agent Vi Analytics, refer to the Agent Vi Analytics documentation suite.

Note

Agent Vi is not available on the S1816e-SP and S1816e-SR models.

► To configure Agent Vi

1. Start the Web Interface.

2. From the tree, select Configuration >AgentVI Analytics.

3. Select the Engine 1 tab.

4. Keep the following default port numbers:

HTML Port: 15029 for Engine 1 and 25029 for Engine 2

Analytic Port: 15030 for Engine 1 and 25030 for Engine 2

System Port: 15031 for Engine 1 and 25031 for Engine 2

5. For inputs 1 to 4 select On or Off to display a markup overlay on the video.

6. Repeat "Configuring Agent Vi Video Analytics" (page 117)for inputs 5 to 8 in

the Engine 2 tab.

7. Click Open Agent Vi Web Console to view information about Agent VI

uptime and analytics performance.

8. Click Apply to reboot the Edge device.

Configuring Agent Vi Video Analytics