User guide

► To set the audio encoder properties
1. Start the Web Interface.
2. From the tree, select Configuration >Audio.
3. Select the Encoder Properties tab.
4. From the Compression Mode list, select one of the following:
PCM
μ-LAW
5. Click Apply.
Setting the Audio Output Properties
The S1801e, S1802e, S1808e-A and S1816e-A supports bi-directional audio:
audio input and output. The audio output properties allow you to set the Gain to
increase the amplitude of the input signal.
Chapter 5: Using the Web Interface for Configuration
© 2013 Verint Video Systems Inc. 110