User guide

10. In the User Authentication Type list, select the authentication algorithm

for SNMP requests. You can select from the following:

No Authentication:No authentication is used.

MD5 Authentication:The Message Digest Version 5 (MD5) hash

function is used to determine that the message is from a valid source.

SHA Authentication:The Secure Hash Algorithm (SHA) has function is

used to determine that the message is from a valid source.

11. In the User Authentication Password box, type a password for the user.

12. In the User Privacy Protocol list, select the privacy protocol to encrypt

the contents of the data. You can select from the following:

No Encryption:No encryption is used.

DES Encryption:The Data Encryption Standard (DES) algorithm is used

to encrypt the data.

AES Encryption:The Advanced Encryption Standard (AES) algorithm is

used to encrypt the data.

13. In the User Privacy Password box, type a password for the privacy

protocol.

14. Click Apply.

Viewing MIB Information

You can download the device Management Information Base (MIB) and use a

SNMP application to view the information. The MIB is a collection of

manageable entities of the device network element.

The S1800e series device sends a coldStart trap when it is initialized and sends

the following Verint-Specific SNMP traps:

Video Signal Loss edVinMediaStateAnalogNotif trap. This trap is generated if

an analog video input of an S1800e series device is disconnected or

reconnected with the following information:

Input number (1 to 16 for S1816e and S1816e-SP, 1 to 8 for S1808e)

New state (0: not connected, 1: connected)

Dry Input State Change edDigitalinPinStateNotif trap. This trap is generated

if the status of a digital alarm dry contact input of the S1800e device has

changed with the following information:

Input number (1 to 16 for S1816e and S1816e-SP, 1 to 8 for S1808e)

New state (0: not connected, 1: connected)

Chapter 5: Using the Web Interface for Configuration