User guide

Configuring the Video Output Properties

The S1800e decoders support four to six H.264 video streams, displaying up to

four tiles on traditional CCTV monitors and up to six tiles on high-definition LCD

or plasma monitors.

► To configure the video output properties

1. Start the Web Interface.

2. From the tree, select Configuration >Video.

3. From the Output Properties tab, set the output values.

(Only on HDMImodel) Resolution:The number of pixels that you can

display on the monitor. Select from the following:

1080i60

1080i50

720p60

720p50

480p60

576p50

640 × 480p60

Discovery Mode: How the unit is represented through VSIP. Select

from the following:

Normal: 1 physical output, 4 decoders

Legacy: 4 physical outputs, 1 decoder per output

Configuring the Video Output Properties