User guide

5. IntheDwell Timetextbox,enterthenumberofsecondstodisplaythe

selectedcamera’svideobeforeswitchingtothenextcamerainthetour.

ThedefaultdwelltimeissetintheGeneralSettingseditoroftheVirtual

Matrixworkspace.

6. Toaddatourtothistour,fromtheVideo Sourcestree,selectatour,then

click (doublerightarrows).

7. ClickApply.

Defining Salvos

InNextivaVMS,asalvoreferstoseveralcameratoursthatrunonseveral

differentanalogmonitorsatthesametime.

► To define salvos

1. SelectSystem Components>Virtual Matrix>Salvo.

2.

SelectaSalvofromtheSalvoListorclick (Add)tocreateone.

3. EnterauniquenameforthesalvointheSalvo Nametextboxorusethe

default.TheSalvoIDisautomaticallygeneratedbyaddingonetothe

previousID.Youcanoverwritethisvalue.

4.

Click (Add)toaddcameratoursandmonitorsforthesalvo.

5. SelectthetoursfromtheTourIDlistandthemonitorsfromtheMonitor

Namelist.Youcanaddasmanytoursandmonitorsasrequired.However,if

allmonitorsareinuse,amessageisdisplayedindicatingthatnomonitoris

available.Inordertoruntheselectedtour,youwouldneedtoremove

anothertourfromthelist.

6. ClickApply.

Chapter 3: Configuring the HDR 1800 In Nextiva VMS6.2 and Higher