User guide

4. AsequentialanduniqueIDnumberisassignedtotheselectedcameras.

5. ExistingvideosourceIDsarenotmodifiedwhenyouperformthis

procedure.

6. TomodifyavideosourceID,intheVideoSourceIDcolumn,clickonanID

value,thenoverwritethevalue.

7. ClickApply.

Defining Monitors in the Virtual Matrix

WhenamonitorconnectedtotheHDR1800isdefinedandconfiguredinthe

VirtualMatrix,youcanuseittodisplayvideofromcamerasorconfigureitto

displayalarmvideo.

Theycanviewpredeterminedimagesequences,videofrommultiplecameras

onasinglemonitor(tours),andmultipletoursatonetime(salvos).Theusers

cancontrolPTZcameras,assigncamerastomonitorsondemand,and

simultaneouslyreplayalarm-basedvideoatmultiplelocationsforredundancy

andcoordinatedresponse.

Note

Ifnomonitorsareassignedinthevirtualmatrix,thencameravideois

displayedonlyinRevieworWebReview.YoucanthenuseReviewin

conjunctionwithaCCTVkeyboardtoviewcameravideoandtocontrolPTZ

cameras.

Assigning Monitor IDs

Forananalogmonitortodisplayvideo,itmustbeassignedamonitorIDinthe

VirtualMatrixworkspace.WhenamonitorhasanIDnumber,youcanusethat

monitorinacameratourorsalvo,ortodisplaycameravideoonthemonitor

usinganyCCTVkeyboard.

Inamultisitedeployment,themonitorIDvaluemustnotexceed999.This

valueshouldnotexceedtheIDvalueofthesitetowhichthemonitoris

assigned.

Chapter 3: Configuring the HDR 1800 In Nextiva VMS6.2 and Higher