User guide

Configuring Monitor Output Settings

BeforeusingHDR1800,youmustconfigurethemonitoroutputsettings.This

involvessettingthenumberoftilesorvideooutputstodisplayoneachofthe

monitorsconnectedtotheHDR1800,aswellassettingtheDVIconnectortype

forthemonitors.

Note

Thenumberofscreensthatwillthedisplaydependsonthenumberofdisplay

cardsandoutputportsontheHDR1800.Portsthathavenomonitors

connectedwilldisplayConnectorType:NotConnected.

ThedefaultmonitoroutputsettingsfortheHDR1800asfollows:

Dual Monitor (extended desktop)configurationenabled

Monitor1ConnectorType:DVI

Monitor1Tilelayout:2×2

Monitor2ConnectorType:DVI

Monitor2Tilelayout:2×2

YoucanchangethedefaultsettingsbyspecifyingadifferentTileLayout:1×1,

2×2(default),3×2,3×3,4×3,4×4.

NextivaVMSconsiderseachtileaseparatevideooutputontheHDR1800and

automaticallyassignseachtileaMonitorNamewhentheHDR1800isaddedto

PhysicalandLogicalViews.

Note

YoucanchangethedefaultsettingsbyspecifyingadifferentTile Layout:1×

1,2×2(default),3×2,3×3,4×3,4×4;orbyselectingadifferentConnector

Type:DVI,VGA,orComposite.

► To configure monitor output settings

1. InNextivaControlCenter,selectSystem Components>Devices.

2. SelectPhysical View.Physicaldevicesappearinahierarchaltreeinthe

Devicespane.

3. ExpandthephysicalgroupwheretheHDR1800youwanttoupdate

firmwareonislocatedandselectit.Uponselection,componentsofthe

Configuring Monitor Output Settings