User guide

► To configure the network settings

1. InNextivaControlCenter,clickDevice Discovery.

2. SelecttheHDR-PintheDeviceDiscoveryBrowser.

3. SelecttheNetwork Settingstab.

4. DooneofthefollowingdependingonthestateofHDR1800:

HDR1800inPartially Discovered Devicestate

EdittheIPaddress,SubnetMask,Gateway,andHostName,as

required.

HDR1800inDevice belongs to foreign site state

UncheckBelongs to foreign site.

EdittheIPaddress,SubnetMask,Gateway,andHostName,as

required.

5. ClickValidatetoensurethatthesettingsarevalid.

6. ClickApply.

Chapter 3: Configuring the HDR 1800 In Nextiva VMS6.2 and Higher