User guide

5. Whenyouselectthemanufacturer,thefieldsthatarerequiredfor

discoveringthedevicearedisplayedbesideProperties.Thesevaryand

mayincludeAdvancedproperties.Refertotheintegrationtechnicalnotefor

thespecificmanufacturer.

6. EntertherequiredinformationinthePropertiesfields.

7. ClickDiscover.

8. AlldevicesmatchingtheparametersenteredaredisplayedunderUnit(s)

discovered.

9. Repeatsteps1to6,ifrequired.ThenclickDone.

Configuring the HDR 1800 Network Settings

Bydefault,theHDR1800isDynamicHostConfigurationProtocol(DHCP)

enabled.IfyouhaveaDHCPserver,theHDR1800automaticallyobtainsanIP

addressuponinitialstartupfromtheDHCPserver.

IfaDHCPserverisnotavailableonthenetwork,theHDR1800assignsitselfa

temporaryIPaddressbasedontheAutomaticPrivateIPAddressing(APIPA)

addressingformat.TheAPIPAschemeallowsadevicetoassignitselfa

temporaryIPaddressuntilitreceivesacompletenetworkconfiguration,either

manuallyorfromaDHCPserver.

NextivaVMSdoesnotsupportDHCPforNextivaedgedevices.Youmustusea

staticIPaddressthatisoutsidetheDHCPranage.

ThefieldsdisplayedontheNetworkSettingstabvaryaccordingtowhetheryou

selectasingledeviceormultipledevicesintheDevice Discoverybrowser.

Configuring the HDR 1800 Network Settings