Specifications

Unpacking

Please check your shipping carton for the

following items:

• Verilux

Rise & Shine Natural Sleep System

• AC power cord

• External FM antenna

• Secure Digital (SD) Card containing natural ambient soundscapes and

wake-up tones. This card can be found in the SD card reader opening (see

number 9 in the image above).

Selecting a location

• Place your Rise & Shine on a table or other ﬂat surface near your bedside.

• For best performance, place product within two feet of a wall and avoid

placing it in a corner.

• Avoid placing product on a metal surface; this could interfere with FM reception.

• Do not install near any heat sources, such as radiators, heat registers, stoves

or other apparatus (including ampliﬁers) that produce heat.

• No naked ﬂame sources, such as lighted candles, should be placed on this

device.

Connecting to Power

1. Plug the AC power cord into the power connector on the rear panel labeled

120V-60Hz.

2. Plug the other end of the AC power cord into an AC wall outlet.

Connecting an Auxiliary Lamp

If you wish to supplement the Rise & Shine LED light panel with an

auxiliary lamp:

Plug the AC power cord of a lamp with an incandescent bulb

of not more than 100 watts into the Auxiliary Lamp connector

receptacle on the rear of the Rise & Shine.

Note: ONLY designed to power a lamp, not for use with other electrical devices.

WARNING:

The auxiliary lamp connector slot is only designed to power a

lamp, and is not for use with other electrical devices.

CAUTION:

Only use lamps with incandescent bulbs of 100W or lower as a

light supplement with the product.

Setting up Your Rise & Shine

Front Panel

CAUTION:

VA04-Man-Rev32.indd 10 7/19/11 10:43 AM