User Guide

ManualsBrandsVerilux ManualsOtherPL04

PL04

Planet Light

Energy Saving Natural Spectrum

Floor Lamp

Summary of content (12 pages)

PAGE 1
Planet Light ® PL04 ® Energy Saving Natural Spectrum Floor Lamp
PAGE 2
Dear Customer, Thank you for purchasing the Planet Light® Energy Saving Natural Spectrum® Floor Lamp. You have received a quality product, backed by a one-year limited warranty. As a Verilux customer, your satisfaction means everything to us. We look forward to serving you now and in the future. Many other healthy lighting products are available through our catalog and online. Visit us on the web at www.Verilux.com to request a free catalog and learn more about all our quality Verilux products.
PAGE 3
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Thank you for purchasing the Planet Light® Energy Saving Natural Spectrum® Floor Lamp. Please read the following safety information before using. To reduce the risk of ﬁre, electrical shock or injury to persons: • Do NOT dismantle. • Do NOT alter power cord. • Turn off/unplug and allow to cool before replacing bulb or cleaning. GENERAL PRECAUTIONS • For indoor use only. • The lamp is an electrical device. DO NOT USE NEAR WATER.
PAGE 4
GETTING STARTED Main Parts & Controls A. B. C. D. E. F. Polarized Plug G. Bulb H. On/Off Switch Lamp Head Gooseneck Shaft Lamp Base Power Cord Close-up of Lamp Head A B G H C E D F CAUTION: DO NOT LIFT THE LAMP BY THE GOOSENECK. THE LAMP SHOULD BE LIFTED BY THE SHAFT.
PAGE 5
UNPACKING YOUR LAMP 1. Remove all pieces from box. Locate 2 Phillips head screws. 2. Detach red plastic pieces and store them in the event you need to return the lamp. 3. Important: To avoid scratching the metal shaft, do not use a sharp object to cut the plastic covering. The clear plastic covering on the shaft is specially designed to tear away easily. IMPORTANT NOTE: Remove red plastic protective pieces prior to assembly.
PAGE 6
ASSEMBLY INSTRUCTIONS Read Instructions Carefully Before Assembly: 1. Connect the two ends of the Power Cord (between the Base and the Shaft) using the lock connectors. 2. Carefully tuck excess Power Cord into the Shaft. DO NOT CUT OR SHORTEN THE POWER CORD. 3. Insert the Flex Pole and the Shaft into the Base. 4. Check direction of the lamp and the hole on the Base, then use a Philips Head Screwdriver (not included) to tighten the screw into the hole.
PAGE 7
ASSEMBLY INSTRUCTIONS cont. 5. To prevent damage during shipping, the Verilux bulb is surrounded by protective padding. Carefully remove and dispose of the protective padding. Check to ensure that the bulb is fully seated and has not come loose from the socket during shipping. There should be no gap between the bulb and socket. 6. Plug lamp into outlet and turn on. If bulb does not illuminate instantly, please refer to the troubleshooting section of this manual.
PAGE 8
BULB REPLACEMENT INSTRUCTIONS Removal 1. Unplug lamp from power source. C 2. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion. A B Installation 1. Unplug lamp from power source. C 2. Firmly hold base (B) and push bulb (C) into the socket (A). 3. Be sure bulb is ﬁrmly seated in the socket (see below) and snapped into the metal bulb clip (D).
PAGE 9
TROUBLESHOOTING Before requesting service on your Planet Light® lamp, please read the following: • Make sure all power connectors, cords and plugs are inserted fully and securely. • Be sure the bulb is securely seated into the socket. (See page 8) • Make sure there is power to the wall outlet or try another outlet. • CAUTION: DISCONNECT LAMP BEFORE PERFORMING ALIGNMENT ACTIVITY. Problem with aligning screw holes? Always start with the base and work your way up the shaft and attach the head last.
PAGE 10
CARE & CLEANING Your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed sufﬁcient time for the unit to cool. All liquid should be properly wiped away and dried prior to restoring power.
PAGE 11
One Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.verilux.com, or you may call our Customer Service Department at 802-496-3101 during normal business hours. This limited warranty is provided by: Verilux®, Inc.