VT03
IMPORTANT SAFETY INSTRUCTIONS CAUTION: • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in this owner’s guide.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – before using this lamp. 2. Keep these instructions – for future reference. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this lamp in damp/humid or wet locations. 6. For indoor use only. 7. Clean only with dry cloth. 8. Do not block any ventilation openings. 9. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 10.
GENERAL PRECAUTIONS • Do not use with power supply voltage other than 120V AC • Avoid placing the lamp in areas that are dusty, humid/moist, lack ventilation, or are subject to constant vibration. • Not for use with light dimmers, timers, motion detectors, voltage transformers, or extension cords. • Do NOT use lubricating agent in bulb assembly. • The light bulb may become loose during transit. To reinstall the light bulb, see the bulb installation instructions on page 6.
SET-UP INSTRUCTIONS Unpacking Please remove all packaging material. Check the carton for the items pictured below: Lamp Bulb Diffuser Selecting a location • Place your Verilux® HappyLite® Mini Sunshine Supplement Light System on a table or other flat surface. • For best performance, place the lamp within two feet of you. Note: Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat-radiating products, such as heaters.
SET-UP INSTRUCTIONS Bulb & Diffuser installation 1. Insert bulb into lamp by firmly holding bulb base and push into the socket (See below) Note: Make sure bulb is fully inserted into the socket. The bottom of the bulb base should touch the plastic housing of the lamp. 2. Attach the plastic diffuser to the lamp body by first inserting the tab located at the bottom of the diffuser (A) into the opening of the lamp base (B). 3.
SET-UP INSTRUCTIONS Instructions for use Light therapy consists of sitting close to the HappyLite® Mini with eyes open. While staying oriented toward the light, feel free to engage in other activities such as reading, writing, hobby making & crafting, sewing, needlepoint, applying makeup, painting, or working at a computer/desk. • Turn on the lamp and allow a few minutes at the start of each session for the bulb to achieve full brightness.
BULB REPLACEMENT Bulb removal and replacement 1. Unplug lamp from power source. 2. To access the bulb, remove the plastic diffuser by depressing the tabs (D) and lifting it out. 3. Firmly hold the bulb base (B) (Do not hold the glass portion of the bulb) and pull bulb from the socket in an outward motion (rocking slightly if needed). 4. To re-install bulb and plastic diffuser, see instructions on page 6.
TROUBLESHOOTING Before requesting service on your Verilux® lamp please read the following: • Make sure all power connectors, cords, and plugs are inserted fully and securely. • Be sure the bulb is securely seated in the socket. (See page 6) • Make sure there is power to the wall outlet or try another outlet – not connected to a dimmer. CARE & CLEANING Your Verilux® lamp is made from high quality materials that will last for many years with a minimum of care.
DISCLAIMER Verilux® does not make any medical claims regarding the use of this product. This product is solely intended for use as portable supplemental lighting; and is not listed as a medical device. Always consult a qualified health care professional before using light therapy. It is advisable that you contact a doctor if: • You are hypersensitive to light and/or experience eye discomfort. • You are currently taking any medication that might increase your sensitivity to light.
