Energy Lamp USER INSTRUCTIONS ITM./ART.
Dear Customer, Thank you for purchasing the Verilux HappyLight® Energy Lamp. You have received an innovative and quality manufactured product, backed by a one year limited warranty. This product brings Natural Spectrum® Daylight into your home or office. Many other healthy lighting products are available through our catalog and online. Visit us on the web at www.verilux.com to request a free catalog and learn more about all our quality Verilux products, or call our toll-free number 1-800-454-4408.
Contents Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Device Pretest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Selecting a Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Instructions for Use . . . . . . . .
READ ALL INSTRUCTIONS BEFORE USING Important Safeguards DANGER: • Do not operate this device near a water source to avoid electrocution. WARNING: • Do not use with power supply voltage other than 120 VAC. • Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. The wider blade is provided for your safety. If the provided plug does not fit in your outlet, consult an electrician for replacement of the obsolete outlet.
CAUTION: — continued • This lamp is not for use with light dimmers, timers, motion detectors, voltage transformers or extension cords. • Do not leave the lamp unattended during use. • Do not use a lubricating agent in bulb assembly. • Light bulbs get hot quickly! Do not touch the bulb while the lamp is on. • Use only the type of bulb and maximum wattage indicated by Verilux®. • Never cover the lamp or place anything on top of it when it is in operation.
Operation Selecting a Location • Place your Verilux® HappyLight® Energy Lamp on a table or other flat surface. • For best performance, place the HappyLight between 5 and 24 inches from your face. CAUTION: Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat-radiating products such as heaters. Do not place the lamp on the top of appliances that radiate heat.
Operation — continued Minimum Recommended Usage 30 minutes to 1hour* Researchers at the National Institute of Health demonstrated that white light, in a range of 2,500 to 10,000 LUX (a measurement of light intensity), helped to reverse the symptoms of “Winter Blues”. Different exposure strategies work for different people. We all have different reactions to our environment. It is important to establish a distance and schedule that is comfortable for you.
Bulb Removal and Replacement Your HappyLight® uses a bulb manufactured only by Verilux®. To order a replacement bulb, please call Verilux, toll-free at 1-800-454-4408. To Replace the Bulb: 1. Unplug the lamp from power outlet. 2. To access the bulb, remove the plastic diffuser by pressing the tabs (D) and lifting out the diffuser. 3. Using a standard screwdriver, remove the two screws (E) which secure the bracket. Remove the bracket (F). 4. Remove the bulb (B) by holding the base and pulling straight up.
Bulb Removal and Replacement — continued Re-installing Bulb and Plastic Diffuser 1. Insert bulb into lamp by firmly holding bulb base and pushing down until you hear a “snap” to seat properly. 2. Re-install the bracket using the screws (E) you previously removed. 3. To attach the plastic diffuser to the lamp body, loosely insert Tab A into Slot A. 4. Insert one diffuser corner at a time. 5. Work one diffuser corner into the side track and slide gently down into place into the bottom track. Tab A 6.
Troubleshooting Before requesting service on your Verilux® lamp, please read the following: • Make sure all power connectors, cords and plugs are inserted fully and securely. • Be sure the bulb is securely seated in the socket (see pages 8 and 9). • Make sure there is power to the wall outlet or try another outlet – one that is not connected to a dimmer. PROBLEM Light Won’t Come On CHECK Has the plug come loose? Is the bulb old? SOLUTION Insert plug securely into wall outlet.
Technical Specifications HappyLight® Energy Lamp Environment Operating Temperature: 15 to 35°C (56 to 95°F) Storage Temperature: 0 to 40°C (32 to 104°F) Relative Humidity: 5 to 95% non-condensing Bulb Replacement bulb: 36 Watt 10,000 hour bulb. Replace with Verilux® brand only, Model number CFML36VLX by calling 1-800-454-4408 or visiting www.verilux.com. Power Input Power: 120 VAC, 60Hz, 0.
One Year Limited Warranty ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT! Many questions may be answered by visiting www.verilux.com, or you may call our Customer Service Department at 1-800-786-6850 during normal business hours. This limited warranty is provided by: Verilux, Inc.