Natural Spectrum® ShopLight™ INSTRUCTION MANUAL VC01HH1
Important Safety Instructions SAVE THESE INSTRUCTIONS Thank you for purchasing the Verilux® Natural Spectrum® ShopLight™. PLEASE READ THE FOLLOWING SAFETY INFORMATION BEFORE USING. To reduce the risk of fire, electrical shock, or injury to persons: • Do NOT dismantle. • Do NOT alter power cord. • Turn off/unplug and allow to cool before replacing bulb or cleaning. • For indoor use only. • This portable lamp has a polarized plug (one blade is wider than the other).
Parts Diagram Main Parts & Controls A. Lamp Head B. Clamp Assembly C. Clamp Screw D. Tightening Knob E. Power Cord F. Polarized Plug G. Metal Wire Guard H. Bulb I. On/Off Switch Close-up of Lamp Head H A I G F E Fig. 1 Fig. 3 B D C Fig.
Assembly Instructions READ INSTRUCTIONS CAREFULLY BEFORE SET-UP 1. Remove lamp from box and packaging. Note: Please save original packaging for repacking should you need to return the product. 2. There are three mounting options: Wall Mount: Using #6 screws (not included) secure the clamp to the wall and then insert the pin into the hole of the clamp. (Fig.
Bulb Removal or Installation Removal 1. Unplug lamp from power source. 2. Remove metal wire guard by depressing the tab and lifting it out. (See Fig. 1) 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion. (See Fig. 2) Fig. 1 Installation 1. Unplug lamp from power source. 2. Firmly hold base (B) and push bulb (C) into the socket (A). (See Fig. 2 ) 3. Be sure bulb is firmly seated in the socket (See Fig. 3 below) and snapped into the metal bulb clip (D). 4.
Troubleshooting Before Requesting Service on Your Verilux® Natural Spectrum® ShopLight™, Please Read the Following: • Make sure all power connectors, cords, and plugs are inserted fully and securely. • Be sure the bulb is securely seated into the socket. (See page 5) • Make sure there is power to the wall outlet or try another outlet.
