VD01
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Thank you for purchasing the Original Natural Spectrum® Deluxe Desk Lamp. Please read the following safety information before using. To reduce the risk of fire, electrical shock, or injury to persons: • • • • • Do NOT dismantle. Do NOT alter power cord. Turn off/unplug and allow to cool before replacing bulb or cleaning. For indoor use only. The lamp is an electrical device.
GETTING STARTED Main Parts & Controls A. B. C. D. E. F. G. H.
SET-UP INSTRUCTIONS 1. Attaching the Parabolic Grid Diffuser • Remove grid diffuser from protective plastic bag • Insert plastic pegs at bottom of grid diffuser into openings near bulb socket • Snap tab into place 2. Plug lamp into outlet and turn on; if bulb does not illuminate instantly, please refer to the troubleshooting section of this manual.
BULB REPLACEMENT INSTRUCTIONS Removal 1. Unplug lamp from power source. C 2. To access to the bulb, remove grid diffuser by depressing the tab and lifting it out. (See page 5) 3. Firmly hold bulb base (B) and pull bulb (C) from the socket (A) in an outward motion. A B Installation 1. Unplug lamp from power source. C 2. Firmly hold base (B) and push bulb (C) into the socket (A). 3. Be sure bulb is firmly seated in the socket (see below) and snapped into the metal bulb clip (D). A 4.
CARE & CLEANING Your lamp is made from high quality materials that will last for many years with minimum care. You may want to periodically clean the lamp, using a mild non-abrasive cleaner and soft cloth. When cleaning, make sure you have turned off and unplugged the unit, and allowed sufficient time for the unit to cool. All liquid should be properly wiped away and dried prior to restoring power.
