Operating instructions

8
Bulb Replacement Instructions
Removal
1. Unpluglampfrompowersource.
2. To access the bulb, remove Optix
®
glare control filter by depressing the
thumb tab and lifting it out.
3.Firmlyholdbulbbase(B)andpull
bulb(C)fromthesocket(A)inan
outwardmotion(Fig.9).
Installation
1.Unpluglampfrompowersource.
2.Firmlyholdbase(B)andpushbulb
(C)intothesocket(A).
3. Be sure bulb is firmly seated in the
socket(seebelow)andsnappedinto
themetalbulbclip(D)(Fig.10).
4. Replace Optix glare control filter.
No
gap
Notice
large gap
Correctly seated bulb Incorrectly seated bulb
YES
NO
Fig.9
Fig. 10
C
B
A
D
CAUTION:
Always unplug lamp before performing bulb
replacement or installation.
VF03-MAN-Rev11.indd 8 10/9/13 2:51 PM